Qipang steel and plastic cable guide wheels 1006S
Anti static, high wear coefficient, low friction coefficient
The surface finish is ra 0.2, the runout is less than 0.15 when rotating, the materialis 99% Al2O3, the hardness is HRA 88, and the densityis 3.85. options:
The wire wheel is widely used in winding machine. It is composed of plastic sidebaffle, ceramic inner ring and bearing. A good conductor wheel should meet the following
The plastic side baffle plate is straight without deformation, the injection moldingline is clear, and the edge of the plastic baffle is neat and smooth without burr;After precision grinding, the surface of ceramic inner ring is bright without pores,natural luster and defect, and its shape is round; The three parts are assembled tightly and the gap is symmetrical. The key point isthat the runout is within 0.1 mm when rotating .
It is suitable for wire and cable factory, copper wire factory, wire drawing machine,stranding machine, winding machine, tinning annealing machine, extrusion machine. The structure is Taiwan anti-oxidation nylon, the coil is precision porcelain ring, and the inner shaft is standard bearing or water bearing Product specification: 1001 -- 1010 There are more than 10 specifications of the combined guide wheel. The commonly used specifications are listed below for customers to choose. Pleaseselect the appropriate inner hole